I've connected my A500+/piStorm/Emu68 (latest build) to my FritzBox 7530 using a plipbox. PlipBox is using an external power supply. Since Amiga can't handle IPv6, I've ordered IP4 support from my provider (M-NET), that usually just gives you IP4 only over DS-Lite tunneling. IP4 is activated in my FritzBox (pic 1).
My Plipbox is configured for static IP, since DHCP can't find anything working on the FritzBox:
config files:
================================
devs:netinterfaces/plipbox:
device=plipbox.device
unit=0
address=192.168.178.44
netmask=255.255.255.0
requiresinitdelay=no
devs:internet/routes:
# local address of my router:
default 192.168.178.1
devs:internet/name_resolution:
nameserer 192.168.178.1
nameserver 8.8.8.8
nameserver 8.8.4.4
================================
On my FritzBox, I've added a new statical device, configured to open all ports by itsself (pic 2)
The Amiga is sometimes seen by FritzBox, but has no internet connection - and sometimes it is NOT seen.
I can't neither ping from the Amiga to my other local machines, nor from any local machine to the Amiga.
Roadshow doesn't find any nameservers when pinging to the internet or running a browser.
Please help!
Navigation
«
«
«
Amiga Future
«
Community
«
Knowledge
«
Last Magazine
«
Service
«
Search
«
Social Media
«
Advertisement
«
Partnerlinks
no internet with FritzBox 7530/M-Net provider IP4
Support Roadshow
-
- Grade reingestolpert
- Posts: 4
- Joined: 14.09.2011 - 21:22
- Location: Neuberg
- Contact:
Re: no internet with FritzBox 7530/M-Net provider IP4
Hallo Michael, ich hatte Dir am 9. Januar Folgendes dazu auf Deine Anfrage per E-Mail geschrieben (vielleicht ist die Antwort bei Dir noch in der Warteschlange):
Hallo Michael, ich vermute, dass in der Fritzbox der DHCP-Server nicht aktiviert ist. Die Einstellungsseite, deren Bild Du im Forum eingetragen hast, legt meiner Einschätzung nach nahe, dass das Gerät in erster Linie für IPv6-Nutzung eingerichtet ist.
Etwas gebuddelt:
https://avm.de/service/wissensdatenbank ... en-lassen/
Falls es sich damit lösen lässt, wäre das wohl die beste Lösung. Anderenfalls müssten wir "ein wenig" mit den bei Roadshow verfügbaren Mitteln nachbohren, z.B. "debug=yes" in die Konfigurationsdatei für die Plipbox eintragen.
Das würde dann z.B. so aussehen:
Hallo Michael, ich vermute, dass in der Fritzbox der DHCP-Server nicht aktiviert ist. Die Einstellungsseite, deren Bild Du im Forum eingetragen hast, legt meiner Einschätzung nach nahe, dass das Gerät in erster Linie für IPv6-Nutzung eingerichtet ist.
Etwas gebuddelt:
https://avm.de/service/wissensdatenbank ... en-lassen/
Falls es sich damit lösen lässt, wäre das wohl die beste Lösung. Anderenfalls müssten wir "ein wenig" mit den bei Roadshow verfügbaren Mitteln nachbohren, z.B. "debug=yes" in die Konfigurationsdatei für die Plipbox eintragen.
Das würde dann z.B. so aussehen:
# $VER: Plipbox 1.1 (13.12.2022) # # Configuration for Christian Vogelgsang's "plipbox" device, # using the "plipbox.device" driver. # # See https://lallafa.de/blog/amiga-projects/plipbox/ and # https://github.com/cnvogelg/plipbox for more information. # The device name is mandatory device=plipbox.device # If you are using multiple plipbox devices in your local # network, then every single one needs to report a unique # MAC address. The following address is a sample to get # you started. If you need a new address to be used in your # local network, change only the last three numbers, e.g. # from "a0:00:01" for the first plipbox, then "a0:00:02", # "a0:00:03", etc. #hardwareaddress=1a:11:a1:a0:00:01 # If not provided, unit number 0 will be used. You may # have to change this if there are multiple cards of the # same type installed in your machine, or if your network # hardware supports several independent connections #unit=0 # You must either pick a fixed (static) IPv4 address and # a corresponding subnet mask, or request DHCP (dynamic) # network address configuration. # You can combine address/netmask/dhcp, which has the effect # of asking the DHCP server to assign the requested IPv4 # address and subnet mask to this interface, if possible. #address=192.168.0.1 #netmask=255.255.255.0 configure=dhcp # If no DHCP server is present in your network, you can # use automatic interface IPv4 address assignment through # the ZeroConf protocol. Note that this will not set up # default route and DNS servers for you, only the interface # address is configured. #configure=auto # This variant of automatic IPv4 address assignment should # be used in a wireless network instead of 'configure=auto' #configure=fastauto # You can enable diagnostic messages which can be helpful in # tracking down configuration errors. debug=yes # You can choose how much memory will be used when handling # incoming and outgoing network traffic for this device. # The default is to reserve 32 buffers of 1500 byte each, both # inbound and outbound traffic. Larger values may provide # better performance. #iprequests=32 #writerequests=32 # For diagnostic and monitoring purposes it can be helpful to # capture network traffic that flows through this interface. # To enable this option, select one of filter=local, # filter=ipandarp or filter=everything #filter=local #filter=ipandarp #filter=everything # This option disables a workaround required for the Ariadne # network hardware, which, if enabled, would otherwise cause # the interface setup procedure to take longer than really # necessary. requiresinitdelay=noBeim Anwerfen der Adresszuweisung über DHCP wird bei "debug=yes" das Protokollfenster geöffnet und dort dann ausgegeben, was Roadshow beim Rufen in der Wüste von sich gibt, bis hoffentlich ein DHCP-Server zuhört, usw.
Post Reply
2 posts
• Page 1 of 1
Jump to
- Amiga Future
- ↳ Internes
- ↳ Termine
- Computer
- ↳ Amiga und Kompatible Allgemein
- ↳ Amiga und Kompatible Spiele
- ↳ Amiga und Kompatible Hardware
- ↳ Amiga Programmieren
- ↳ Amiga Emulation
- ↳ Amiga General Chat english
- ↳ Andere Systeme
- Sonstiges
- ↳ Kleinanzeigen - Classifieds
- ↳ OffTopic
- APC&TCP
- ↳ APC&TCP-News
- ↳ APC&TCP-Support
- ↳ CygnusEd Support
- ↳ DigiBooster Support
- ↳ Roadshow Support